Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
The sludge judge is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth.
It is ideal for sewage treatment plants, chemical palnts, and food processing facilities - anywhere taht accurate sample levels of settleable solids in noncaustic materials are needed.
The unit holds apporoximately 3 oz. per foot ( 89ml per 0,31m) .
The sludge judge comes in 5ft. ( 1,53m) sections of 3/4" ( 1,90 cm) plastic tubing with screw-type connectors.
The top section includes a nylon rope for raising and lowering the sampler.
Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165' F ( 74' C) .
Sudge Judge is not autoclavable. A convenient cotton canvas carry bag that holds four sections, a cleaning brush, a cleaning rod, and cotton trips are available. One-year warranty.
Dont use to sample ethanol or ethanol-blended motor fuel. To use:
1. Slowly lower the sludge judge to the bottom of the tank
* The float valve opens, allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised.
* This sets the check valve, trapping the mixture inside.
2. When the unit has been raised clear of the liquid, the amount of solid in the sample can be read, using 1ft.( 0.31m) increments marked on the pipe sections. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valveto drain the sample.
